Hi Guys,
I cannot see the radio frequencies in the shift<6> 2d popup !!!
A few months ago I migrated to Win10 and FSX Steam and now for the Comanche, T6, Cherokee, C182, C172 and P51Civ I just can't see the frequencies. The menu looks fine in every other respect and I can see the NAV1, NAV2 text etc.
Cub, P51mil, P40, Spit, Connie, B377 are all fine
This is with radios confirmed on and numerous reinstalls of the aircraft and latest update.
I appreciate that I can use the radio units in the virtual cockpit but my home base is at Duxford in the UK where most of the closest NDB's have the decimal .5 frequency which can only be tuned via the popup
Any ideas ?
Best Regards
Simon
Shift <6> radio frequencies not showing
-
- Airman First Class
- Posts: 97
- Joined: 30 Nov 2012, 15:55
- Location: EGSU
Re: Shift <6> radio frequencies not showing
Radio also accessed through the F10 key. If the pop-up is messing there as well then I'd try a reinstall from scratch.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Shift <6> radio frequencies not showing
Hi Simon,
Do you think it's FSUIPC which is causing issues again? (As with the P-51 radios direct entry mode we discussed back along?) Sounds like an unusual problem if the pop-up shift 6 window is opening fine, but the frequencies aren't being displayed when the radios are on. At any rate, I can't recall it mentioned before. It almost seems as if the 2-D panel thinks the radios are still off for some reason.
The only other culprit which springs to mind is font scaling issue or something similar in Windows (or even a missing font) although it seems unlikely this would affect just the frequencies.
I can't help much with troubleshooting right now as I'm working away from home, but could you post a screenshot?
Cheers,
Nick
Do you think it's FSUIPC which is causing issues again? (As with the P-51 radios direct entry mode we discussed back along?) Sounds like an unusual problem if the pop-up shift 6 window is opening fine, but the frequencies aren't being displayed when the radios are on. At any rate, I can't recall it mentioned before. It almost seems as if the 2-D panel thinks the radios are still off for some reason.
The only other culprit which springs to mind is font scaling issue or something similar in Windows (or even a missing font) although it seems unlikely this would affect just the frequencies.
I can't help much with troubleshooting right now as I'm working away from home, but could you post a screenshot?
Cheers,
Nick
-
- Airman First Class
- Posts: 97
- Joined: 30 Nov 2012, 15:55
- Location: EGSU
Re: Shift <6> radio frequencies not showing
Hi Guys,
I've tried re installing a couple of times but that doesn't work and removing the FSUIPC4.dll didn't work either unfortunately.
Nick, what do you mean by font scaling ? I have an ATI graphics card settings app installed which I have never used, is it likely to be something buried in there ? Also thanks for the help with the p51
I'd like to post a screenshot but don't have the ability yet
Many thanks for the replies...
Regards
Simon
I've tried re installing a couple of times but that doesn't work and removing the FSUIPC4.dll didn't work either unfortunately.
Nick, what do you mean by font scaling ? I have an ATI graphics card settings app installed which I have never used, is it likely to be something buried in there ? Also thanks for the help with the p51
I'd like to post a screenshot but don't have the ability yet
Many thanks for the replies...
Regards
Simon
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Shift <6> radio frequencies not showing
Just wondered if any of the font sizing settings in Windows could be the cause Simon, though admittedly it's unlikely. Speaking of the ATI card, always worth making sure drivers are properly updated, though I haven't used AMD/ATI hardware in a while to know if there are any settings which are likely to cause issues with the A2A menus.
For posting screenshots, all you need is a free file/pic hosting account (e.g. Dropbox, Google, Photobucket etc.) as described here.
Cheers,
Nick
For posting screenshots, all you need is a free file/pic hosting account (e.g. Dropbox, Google, Photobucket etc.) as described here.
Cheers,
Nick
-
- Airman First Class
- Posts: 97
- Joined: 30 Nov 2012, 15:55
- Location: EGSU
Re: Shift <6> radio frequencies not showing
Radios back to normal
Thanks for the link and advice Nick and Mallcott.
I realised that the FSX screen that pops up when you hit <esc> and asks if you want to continue flying or exit had re positioned itself from the middle of the screen to the top left. So I assumed something bad had happened to the installation.
So I bit the bullet and re installed FsxSE and while I was at it did win10 as well.
Now everything is good and I can get back to flying around East Anglia using the NDB's
Regards
Simon
Thanks for the link and advice Nick and Mallcott.
I realised that the FSX screen that pops up when you hit <esc> and asks if you want to continue flying or exit had re positioned itself from the middle of the screen to the top left. So I assumed something bad had happened to the installation.
So I bit the bullet and re installed FsxSE and while I was at it did win10 as well.
Now everything is good and I can get back to flying around East Anglia using the NDB's
Regards
Simon
Who is online
Users browsing this forum: Google [Bot] and 21 guests