The aircraft/sim seem to be working normally, but I can not see the 2D panels.
Help
Thanks
No 2D Panels
Re: No 2D Panels
Hello Blauman, there are no 2d panels in the A2A aircraft. All have detailed 3d cockpits.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33284
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: No 2D Panels
Hello,
just to add to Oracles response do you mean the 2s pop up panels for the maintenance hangar, payload manager etc?
thanks,
Lewis
just to add to Oracles response do you mean the 2s pop up panels for the maintenance hangar, payload manager etc?
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: No 2D Panels
Thank you for your replies. According to the A2A Comanche 250 Pilot's Manual (pg94)
-------------------
2D PANELS
The 2D panels are there to provide the extra functionality
needed when there is so much additional information
available to you, the pilot.
Each 2D panel is accessed by the key-press combination
in parentheses after the 2D panel title.
--------------------
Those "2D panels" are not available to me.
Your help is appreciated.
Thank you
-------------------
2D PANELS
The 2D panels are there to provide the extra functionality
needed when there is so much additional information
available to you, the pilot.
Each 2D panel is accessed by the key-press combination
in parentheses after the 2D panel title.
--------------------
Those "2D panels" are not available to me.
Your help is appreciated.
Thank you
-
- Senior Master Sergeant
- Posts: 2438
- Joined: 15 Mar 2016, 08:23
Re: No 2D Panels
Hi.
Shift+2/shift+3 ectra ,these give things like walkarounds , hangar maint , pilot notes , and shift+3 allows you to select aircraft on jacks , if checking the gear retraction and such , and also cold/dark can be set .
These 2d popups do not show untill you hit shift+2 ectra shift +5 is your nav map.
Once you get used to this aircraft or any A2A aircraft , you will fall in love with them , they are addictive aircraft , that need to be handled correctly.
regards alan.
Shift+2/shift+3 ectra ,these give things like walkarounds , hangar maint , pilot notes , and shift+3 allows you to select aircraft on jacks , if checking the gear retraction and such , and also cold/dark can be set .
These 2d popups do not show untill you hit shift+2 ectra shift +5 is your nav map.
Once you get used to this aircraft or any A2A aircraft , you will fall in love with them , they are addictive aircraft , that need to be handled correctly.
regards alan.
Re: No 2D Panels
Right, I'm not able to see those panels (Mx, walkaround, etc...)
Any idea how to fix this error?
Thank you
Any idea how to fix this error?
Thank you
Re: No 2D Panels
The manual references the panels as 2D panels. I can not view them, and I can not figure out how to remove the pitot cover before flight, as the 2D panels that have the option to remove the cover I'm unable to view. Thus the aircraft is not usable for me.Oracle427 wrote:Hello Blauman, there are no 2d panels in the A2A aircraft. All have detailed 3d cockpits.
Any suggestions?
Thank you
Re: No 2D Panels
If you are using FSX, you can try checking in your display settings screen to make sure that the 2-D panel transparency is turned down. If they are fully transparent, you won't be able to see them
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
Re: No 2D Panels
Thank you, I did, that is not the problem. The aircraft is still unusable.Oracle427 wrote:If you are using FSX, you can try checking in your display settings screen to make sure that the 2-D panel transparency is turned down. If they are fully transparent, you won't be able to see them
Thank you
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33284
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: No 2D Panels
Hello,
Does the shift + panels work in any of your FSX aircraft?
If not you maybe have remapped the controls to open them as its a default command.
Also it could be a simconnect issue, in which case you will want to download and run this, then restart your system;
http://a2asimulations.com/public/downlo ... onnect.msi
thanks,
Lewis
Does the shift + panels work in any of your FSX aircraft?
If not you maybe have remapped the controls to open them as its a default command.
Also it could be a simconnect issue, in which case you will want to download and run this, then restart your system;
http://a2asimulations.com/public/downlo ... onnect.msi
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: No 2D Panels
Thank you for your reply LewisLewis - A2A wrote:Hello,
Does the shift + panels work in any of your FSX aircraft?
If not you maybe have remapped the controls to open them as its a default command.
Also it could be a simconnect issue, in which case you will want to download and run this, then restart your system;
http://a2asimulations.com/public/downlo ... onnect.msi
thanks,
Lewis
There are no issues with other aircraft--only this A2A one. I followed your directions, and it still does not work. I guess at this point I'd like ask for a refund. Can you help me with this request?
Thank you
Ric
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33284
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: No 2D Panels
Hello Ric,
do the panels work with other aircraft and you have run the simconnect and restarted your system?
There no outstanding issues with this so its going to be a very simple system issue at your end we can sort out. Just need as much information as you can give about your setup.
thanks,
Lewis
do the panels work with other aircraft and you have run the simconnect and restarted your system?
There no outstanding issues with this so its going to be a very simple system issue at your end we can sort out. Just need as much information as you can give about your setup.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: No 2D Panels
Lewis - A2A wrote:Hello Ric,
do the panels work with other aircraft and you have run the simconnect and restarted your system?
There no outstanding issues with this so its going to be a very simple system issue at your end we can sort out. Just need as much information as you can give about your setup.
thanks,
Lewis
Lewis
Yes, and yes.
64 Bit Windows 10 Home, FSX Gold Edition, i7 2.8ghz, 8GB RAM, NVIDIA GTX 550Ti.
Not sure what else you need.
I even reinstalled the aircraft, and ran the latest A2A update.
Thank you
Ric
-
- Senior Master Sergeant
- Posts: 2438
- Joined: 15 Mar 2016, 08:23
Re: No 2D Panels
Hi.
FSX gold , did that come with accelleration , if not you will need to either install accelleration , or update FSX to sp1 and 2.
regards alan.
FSX gold , did that come with accelleration , if not you will need to either install accelleration , or update FSX to sp1 and 2.
regards alan.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33284
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: No 2D Panels
Hello,
yes your FSX will need to be updated to SP2 standard (Using either FSX SP1+2 or FSX:Acceleration expansion) to meet the requirements and this would explain why the 2d panels are not working for you. Reinstalling the aircraft wont change this or fix a simconnect issue with the host platform.
Can you confirm your FSX is all updated and if it is run a repair as the SP2 might not be correctly applied or corrupt. This has been known to happen for some FSX users.
thanks,
Lewis
yes your FSX will need to be updated to SP2 standard (Using either FSX SP1+2 or FSX:Acceleration expansion) to meet the requirements and this would explain why the 2d panels are not working for you. Reinstalling the aircraft wont change this or fix a simconnect issue with the host platform.
Can you confirm your FSX is all updated and if it is run a repair as the SP2 might not be correctly applied or corrupt. This has been known to happen for some FSX users.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Who is online
Users browsing this forum: No registered users and 8 guests