The A2A Simulations Community

Dear All,

I would like to install F1 Software GNS 530 & 430 in addition to GTN 650 & 750 already installed and listed in the C 182 Accu Sim "mini controls" panel (Purchase Order n° 114595 Oct 30th 2016).
F1 GNS are already installed on my computer.
When I click on the Aircraft Configurator, the "F1" option is duly ticked, but I dont find any sub-menu to have the list of GPS already installed and to add others (I don't remember how GTN 650 & 750 have been installed when I ran the C182 at the first time).
For your information : In the Panel_F1 file, the GTN 650 and 750 are in (two last lines) but not the GNS 430 and 530. In the airplanes/A2A_182 directory, there is a "F1 GTN" file but no "F1 GNS" file.

Please help me to install the F1 GNS 530/430.
Thank you.
Armand.

Hello,

at the time of this post the 5 and 430 are not supported for integration using the aircraft configurator.

thanks,
Lewis

Hello,
Thank you for your answer. However, the product description on your website says : "Built in, automatic support for 3rd party GNS 430 and 530". And in the pilot's manual page 19 :"Built in, automatic support for 3rd party GNS 430 and 530, 650 and 750". I tried to install the F1 GNS 530 as a pop up window (using the F1 GNS config) but it failed (conflict with other party GPS). So, I don't understand.

Alternatively, the description of the C172 Trainer on your website also says : "Built in, automatic support for 3rd party GNS 430 and 530". May I assume the C172 Trainer is supporting F1 GNS 430 and 530 integrated in the VC or not ?

Please let me know,
Thank you
Armand

Those GPS are supported from Reality XP, not the Flight 1 ones

Yes, those are for the RXP and Mindstar units in FSX. P3D has been updated numerous times since release. We have updated as we go, 4.2 has just been released and we have an update coming soon across the board for aircraft + other areas. This update will add in for free extra GPS support.

thanks,
Lewis

Hello,

Thanks for your answers, both of you. I will try to cope with RXP.
Regards.
Armand.

I have the GNS 530/430 installed in the c182 by running the aircraft configuration and selecting RXP. I then go into F1 configurator highlight the A2A C182 and tick the right lower button to replace the RXP. This will install the F1 gns into the c182. Note, I do not have twin stack nor the GTN 750/650 installed.

I have the F1 GNS 530/430 installed in the c182 by running the aircraft configuration and selecting RXP. I then go into F1 configurator highlight the A2A C182 and tick the right lower button to replace the RXP. This will install the F1 gns into the c182. Note, I do not have twin stack nor the GTN 750/650 installed.

Any update on the FSX version? That is a twin stack Flight One GNS 530/430 install capability?