Hello,
When I'm tuned to the ILS frequency on my GTN 750 - Nav 1 if I'm in VLOC manual mode neither the HSI or default instruments respond and no glideslope shows up. In GPS mode I can only capture the LOC. I tried the same thing in another aircraft I have with the GTN 750 installed and it works both manually as well as autopilot approach mode. Am I missing something to get the glideslope to come in and or hand fly an ILS? Thanks!!
GTN 750 NAV not talking to to HSI
- Oliver Branaschky
- Senior Airman
- Posts: 248
- Joined: 12 Jun 2014, 12:49
GTN 750 NAV not talking to to HSI
Hi and welcome to the forums.
Is your GTN updated? If not (there are some unresolved performance issues with versions 1.19 and ongoing which are still being investigated by Flight1, as far as I know), try dialing in the ILS frequency into your NAV2 and see if that drives the HSI/CDI1. IIRC, there was a mix-up between NAV1 and NAV2 in earlier versions... worth a shot!
Viele Grüße | Best regards,
Oliver
Is your GTN updated? If not (there are some unresolved performance issues with versions 1.19 and ongoing which are still being investigated by Flight1, as far as I know), try dialing in the ILS frequency into your NAV2 and see if that drives the HSI/CDI1. IIRC, there was a mix-up between NAV1 and NAV2 in earlier versions... worth a shot!
Viele Grüße | Best regards,
Oliver
Re: GTN 750 NAV not talking to to HSI
Ah okay... I'll give NAV 2 a try. I'm reinstalling everything right now due to some other bugs so I'll make sure I have v1.20 of the GTN. Thanks for the help!
Who is online
Users browsing this forum: No registered users and 10 guests