Hi Guys,
Firstly, thank you for developing such great products for flight sim enthusiasts like me. A VERY good job indeed.
Secondly, I’ve been using your C172 and C182 in FSX SE in a single computer with one big monitor without any problem for some time. Now, I’m working on a new virtual cockpit that consists of:
(a) Six 24-inch monitors arranged in two rows of three monitors each.
(b) The lower row shows the 3D cockpit and is driven by a master computer (FSX SE) running the actual simulation. It receives my yoke, throttle, etc. inputs and reacts to any event i initiate on the virtual cockpit depicted in the lower row. No scenery is shown here since the eye point is set to only show the instrument panel.
(c) The upper row depicts the top of the virtual cockpit as seen from the pilot’s eyes (i.e. windshield and windows) and it is exclusively used for sceneries as seen from the VC. This row is perfectly aligned with the lower row to show an immersive view as you were in a 3x3 VC and obviously this is just a dummy visual model that complements my lower row. For doing this, a slave computer (FSX SE) running a Wideview client drives the upper row by receiving data from a VideView server running on the master computer.
I purchased two additional licenses of your fantastic C182 and C172 but as you already know, these aircrafts’ internal models are quite complex and they do not get along well when used with Videview clients. In this configuration I just get random shaky movements out of sync with the Master computer.
Using a dummier aircraft with a different VC design really diminishes what I’m trying to achieve, as you might understand.
My question is: It’s possible for me to somehow get just the internal MDL for the C182 and C172 I can integrate within a less complex aircraft? This way I think it might be possible to get the final visual effect I’m trying to obtain.
Thanks a lot,
LuisR
Multi PC, six monitor VC setup with Videview - HELP needed!
The jack of all trades and the world's most popular high performance GA aircraft
Jump to
- General Discussion
- ↳ Pilot's Lounge
- ↳ Flight Academy
- ↳ Repainters
- ↳ Multiplayer
- Accu-Sim 2.0
- ↳ Comanche 250 for MSFS
- ↳ Comanche 250 for MSFS Tech Support
- Accu-Sim
- ↳ Bonanza "V-Tail"
- ↳ Bonanza Tech Support
- ↳ Piper Comanche 250
- ↳ Piper Comanche 250 Tech Support
- ↳ T-6 "Texan"
- ↳ T-6 "Texan" Tech Support
- ↳ C182 Skylane
- ↳ C182 Skylane Tech Support
- ↳ Piper Cherokee 180
- ↳ Piper Cherokee 180 Tech Support
- ↳ C172 Trainer
- ↳ C172 Trainer Tech Support
- ↳ Piper J-3 Cub
- ↳ Piper J-3 Cub Tech Support
- ↳ P-51 Mustang (Military & Civilian)
- ↳ P-51 Tech Support
- ↳ P-40 Warhawk / Tomahawk
- ↳ P-40 Tech Support
- ↳ Spitfire MkI/II
- ↳ Spitfire MkI/II Tech Support
- ↳ B-17 Flying Fortress
- ↳ P-47 Razorback
- Captain of the Ship (COTS)
- ↳ Boeing 377 Stratocruiser
- ↳ Boeing 377 Tech Support
- ↳ Lockheed Model 049 Constellation
- ↳ Lockheed Model 049 Tech Support
- Accu-Feel: Global Sim Enhancement
- ↳ Accu-Feel General Discussion
- ↳ Accu-Feel Technical Support
- ↳ Accu-Feel Development & Feedback
- for FSX (other)
- ↳ A2A Simulations 3D LIGHTS REDUX
- ↳ P40 Warhawk / Tomahawk
- ↳ P51 Mustang
- ↳ Messerschmitt BF109E3/E4
- ↳ Supermarine Spitfire MKI
- ↳ P47 Thunderbolt
- ↳ WWII FIGHTERS
- Aircraft Factory (a division of A2A Simulations)
- ↳ P-51H "High Performance Mustang"
- ↳ Avro 504K
- ↳ Avro Anson MKI
- ↳ Albatros D.III (Oeffag)
- ↳ Heinkel He-219 "Uhu"
- ↳ F4U Corsair
- for FS2004
- ↳ North American P51 "Mustang"
- ↳ Republic P47 "Thunderbolt"
- ↳ Focke Wulf 190 "Butcher Bird"
- ↳ Focke Wulf "Long Nose"
- ↳ Heinkel He 219 "Owl"
- ↳ Heavy Bombers and Jets
- ↳ Wings of POWER Technical Support
- Battle of Britain "Wings of Victory"
- ↳ BOB2 General Discussion
- ↳ BOB2 Technical Support
- ↳ BOB2 FAQ FORUM
- FirePower
- ↳ FirePower General Discussion
- ↳ FirePower Technical Support
- OTHER
- ↳ Other Sim News
Who is online
Users browsing this forum: No registered users and 19 guests