An issue with Cherokee 180 and airport like LFLJ - Courchevel (LLH Creations scenery - LLH5 - Courchevel - http://www.llhinfo.com)
i can't take off from this altiport
once the plateform leaved and engaging on the slope runway, there's automatically a propeller issue with this aircraft and the engine stop
no issue for that with C182T, PA-24 Comanche and T6 Texan
Best Regards
Issue with sloped runway - LFLJ Courchevel
-
- Airman
- Posts: 23
- Joined: 18 Jun 2017, 19:39
Issue with sloped runway - LFLJ Courchevel
Last edited by sima2apilot on 28 Sep 2017, 14:50, edited 1 time in total.
Accusim Aircrafts
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33305
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Issue with slope runway - LFLJ Courchevel
Sounds like you are smashing your prop into the ground?
thanks,
Lewis
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Airman
- Posts: 23
- Joined: 18 Jun 2017, 19:39
Re: Issue with slope runway - LFLJ Courchevel
Hi Lewis
you're absolutely right
and i've tried to move this aircraft with slew mode on the runway then exit slew and parking brake on
When starting the engine, the propeller get immediately damage (no matter it's on the treshold or not)
no problem with plateform location (near hangar)
no problem with PA-24 / C182T / T6-Texan nor default aircrafts in P3DV4
Seen with this high slope runway on LFLJ Courchevel (LLH5 - LLH creations - LLH Info)
Best regards
you're absolutely right
and i've tried to move this aircraft with slew mode on the runway then exit slew and parking brake on
When starting the engine, the propeller get immediately damage (no matter it's on the treshold or not)
no problem with plateform location (near hangar)
no problem with PA-24 / C182T / T6-Texan nor default aircrafts in P3DV4
Seen with this high slope runway on LFLJ Courchevel (LLH5 - LLH creations - LLH Info)
Best regards
Accusim Aircrafts
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
-
- Airman
- Posts: 23
- Joined: 18 Jun 2017, 19:39
Re: Issue with slope runway - LFLJ Courchevel
Hi
is there any info on this issue ?
not on the side of the pilot
please re read carefully : seen only on this airport
this aircraft would not go succesfully on this airport with or without moving, and without fix
the best is perhaps to try it on your own to fully understand what's about
Best regards
is there any info on this issue ?
not on the side of the pilot
please re read carefully : seen only on this airport
this aircraft would not go succesfully on this airport with or without moving, and without fix
the best is perhaps to try it on your own to fully understand what's about
Best regards
Accusim Aircrafts
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33305
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Issue with slope runway - LFLJ Courchevel
Hello,
sorry I am not sure theirs anything we can do for this.
thanks,
Lewis
sorry I am not sure theirs anything we can do for this.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Airman
- Posts: 23
- Joined: 18 Jun 2017, 19:39
Re: Issue with slope runway - LFLJ Courchevel
Hi Lewis
sure there's something wrong in the embedded AccuFeel module angle or distance detection
feel free to PM me to see if we can work together with the editor at no fee
i'd better like you to see the issue on your own with
for info
all is fine until around this point :
https://1drv.ms/i/s!Amos4kbvuA4MlGffXjDcf7vYuA0L
and all is going wrong at exactly this point every time :
https://1drv.ms/i/s!Amos4kbvuA4MlGhejS6uilhppi3D
here's a short video found of a take-off and land from and on this runway
Courchevel LFLJ
https://www.youtube.com/watch?v=cTmw2MJJ3q0
can anyone says if there's a similar US runway that i can check on it ?
Best Regards
Gilles
sure there's something wrong in the embedded AccuFeel module angle or distance detection
feel free to PM me to see if we can work together with the editor at no fee
i'd better like you to see the issue on your own with
for info
all is fine until around this point :
https://1drv.ms/i/s!Amos4kbvuA4MlGffXjDcf7vYuA0L
and all is going wrong at exactly this point every time :
https://1drv.ms/i/s!Amos4kbvuA4MlGhejS6uilhppi3D
here's a short video found of a take-off and land from and on this runway
Courchevel LFLJ
https://www.youtube.com/watch?v=cTmw2MJJ3q0
can anyone says if there's a similar US runway that i can check on it ?
Best Regards
Gilles
Accusim Aircrafts
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
- Nick - A2A
- A2A Captain
- Posts: 13777
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Issue with sloped runway - LFLJ Courchevel
Yes - the A2A Cherokee does seem strangely susceptible to prop strikes when on sloped terrain; much more so than the Cessnas and Comanche anyway. This was brought home to me when I tried using it at the (excellent and free ) new Locher airfield scenery, as mentioned here.
Maybe something with the MDL file which could be tweaked?
Thanks,
Nick
Maybe something with the MDL file which could be tweaked?
Thanks,
Nick
-
- Technical Sergeant
- Posts: 899
- Joined: 30 Nov 2014, 19:07
- Location: US
- Contact:
Re: Issue with sloped runway - LFLJ Courchevel
I did the exact same thing at Locher last night. I was taxiing slowly and the engine died for no apparent reason. A quick check of the hangar showed the prop and crankshaft were destroyed.Nick M wrote:Yes - the A2A Cherokee does seem strangely susceptible to prop strikes when on sloped terrain; much more so than the Cessnas and Comanche anyway. This was brought home to me when I tried using it at the (excellent and free ) new Locher airfield scenery, as mentioned here.
Maybe something with the MDL file which could be tweaked?
Thanks,
Nick
-
- Airman
- Posts: 23
- Joined: 18 Jun 2017, 19:39
Re: Issue with sloped runway - LFLJ Courchevel
That's the issue
good idea i will check again on the Locher Airfield too
Best Regards
Gilles
good idea i will check again on the Locher Airfield too
Best Regards
Gilles
Accusim Aircrafts
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
-
- Airman
- Posts: 23
- Joined: 18 Jun 2017, 19:39
Re: Issue with sloped runway - LFLJ Courchevel
Yes, checked at the moment on Locher Airfield
the issue is exactly the same,
starting on RW17 on the higher part of the airfield
for me i obtain differents result after many restart, but the main is the PROP broken watching in the hangar
At least the Locher/Sarentino is a free scenery downloadable on AVSIM,
if you want to take a look, and this is the same issue on LFLJ Courchevel or on those airports, altisurfaces, airfield having a slope runway
things seems a little sensitive on this aircraft measuring the slope or the ground proximity of the prop ?!
Locher/Sarentino Airfield
https://library.avsim.net/esearch.php?C ... LID=201206
Best regards
Gilles
the issue is exactly the same,
starting on RW17 on the higher part of the airfield
for me i obtain differents result after many restart, but the main is the PROP broken watching in the hangar
At least the Locher/Sarentino is a free scenery downloadable on AVSIM,
if you want to take a look, and this is the same issue on LFLJ Courchevel or on those airports, altisurfaces, airfield having a slope runway
things seems a little sensitive on this aircraft measuring the slope or the ground proximity of the prop ?!
Locher/Sarentino Airfield
https://library.avsim.net/esearch.php?C ... LID=201206
Best regards
Gilles
Accusim Aircrafts
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
C182 Skylane / PA-28 Cherokee 180 / PA-24 Comanche 250 / T-6 Texan
Simu
P3D V4.1 / X-Plane 11 / FSW with Accusim
Who is online
Users browsing this forum: No registered users and 16 guests