The radio stack does not light

[micland]

I have the Cherokee 180 updated 05_09_16 for P3D v3.4
Why I have to recharge the aircraft for radio light up?

Michel

[Lewis - A2A]

Hello and welcome to the forums,

can you let us know what you mean by recharge?

thanks,
Lewis

[micland]

Hello lewis

I should say: reload the aircraft.
That's what I do on my P3D:
I run P3D with the Cherokee, then Master on, Radio master on, eg Com/Nav 1 on, => no display on the screens of the Bendix King; but the radio works because the screen of my Saitek Radio Panel is illuminated.
If I reload the aircraft by "reload user object" or Vehicle/Select Vehicle/PA-28-180 Cherokee => all is right!

thanks,
Michel

[gulredrel]

Do you start the flight with a default aircraft or with the Cherokee directly?
It's better to load a default aircraft and than change to complex types like A2A.

Regards
Jens

[micland]

I start with my recorded flight directly with the Cherokee.
I did not have this problem before with A2A C182 and FSX...

Michel

[gulredrel]

There are several threads about initial loading problems. Recommendation is to start the sim in an default aircraft and change afterwards.

[micland]

Thank you

Best regards
Michel