p3d v4 crash after few secends

[rotem871]

hi, i am using a2a c172 and every time when i set to dusk or night the game crash
and when its day the landing\taxi light arent working it show a small light
these is the error i got:
[error.297]
error=Failed to load visual effect "fx_obslight2"

[error.298]
error=Failed to load visual effect "fx_obslight2"

[error.299]
error=Failed to load visual effect "fx_obslight2"

[error.300]
error=Failed to load visual effect "fx_obslight2"

[error.301]
error=Failed to load visual effect "fx_obslight2"

[error.302]
error=Failed to load visual effect "fx_obslight2"

[error.303]
error=Failed to load visual effect "fx_obslight2"

[error.304]
error=Failed to load visual effect "fx_obslight2"

[error.305]
error=Failed to load visual effect "fx_obslight2"

[error.306]
error=Failed to load visual effect "fx_obslight2"

[error.307]
error=Texture fx_2.bmp failed to load (FE_REQUEST_STATUS==13)

[error.308]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.309]
error=Texture fx_2.bmp failed to load (FE_REQUEST_STATUS==13)

[error.310]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.311]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.312]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.313]
error=Texture fx_2.bmp failed to load (FE_REQUEST_STATUS==13)

[error.314]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.315]
error=Texture fx_2.bmp failed to load (FE_REQUEST_STATUS==13)

[error.316]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.317]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.318]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

this is also happening also on pmdg aircarft, when i set the take off light on they dont work
#note on day light the game dosenot crash only on night or dusk#

[Nick - A2A]

Hello,

Please can you verify if you're using the latest installer for the Cessna 172? If so, it'll bring the installed version up to 18.12.31.0 as shown here. The installed version number is shown in the Windows "apps & features" or "uninstall or change a program" window.

Thanks,
Nick

[rotem871]

thx mate!

[rotem871]

Hello,

Please can you verify if you're using the latest installer for the Cessna 172? If so, it'll bring the installed version up to 18.12.31.0 as shown here. The installed version number is shown in the Windows "apps & features" or "uninstall or change a program" window.

Thanks,
Nick

Hi I have the last installer and the texi light and landing light aren't working because of the file other light is in bmp format and not jpg has its need to be I tried to change it jpg but with no success

[Nick - A2A]

Effects in FSX/P3D use either regular or extended bitmaps: there's no need to change anything to a JPEG image.

If you've made some modifications to installed products, it could explain the issues and CTDs you're encountering.

Thanks,
Nick

[rotem871]

hi i have this file that its making me trouble "fx_a2a_c172_lights_1" this file is a bmp file and because of that my p3d v4 cannot read it and duo to that my sim crashed and after i removed the
bmp file the game didnt crash but the light of taxi and landing didnt work
this i some of the errors i got down below (i tried to changed the bmp file to png but with no sucess)
___________________________________
[error.552]
error=Failed to load visual effect "fx_navwhi"

[error.553]
error=Failed to load visual effect "fx_landing"

[error.554]
error=Failed to load visual effect "fx_landing"

[error.555]
error=Failed to load visual effect "fx_landing"

[error.556]
error=Failed to load visual effect "fx_landing"

[error.557]
error=Failed to load visual effect "fx_landing"

[error.558]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.559]
error=Texture fx_2.bmp failed to load (FE_REQUEST_STATUS==13)

[error.560]
error=Texture fx_a2a_c172_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

[error.561]
error=Texture fx_2.bmp failed to load (FE_REQUEST_STATUS==13)

[rotem871]

Effects in FSX/P3D use either regular or extended bitmaps: there's no need to change anything to a JPEG image.

If you've made some modifications to installed products, it could explain the issues and CTDs you're encountering.

Thanks,
Nick

i havent done any modifications to installed products

[Nick - A2A]

I've merged your posts for clarity rotem871. Please try to avoid creating separate threads discussing the same issue as it only make it harder to track and resolve the issue.

As mentioned, effects in FSX/P3D use either regular or extended bitmaps: there's no need to try and change them to anything else. The content errors for various products reported may be unrelated to the CTD.

Please can you try to clarify the sequence of events your experiencing, as it's currently a little hard to follow. Also, which aircraft is saved within the P3D default flight?

Thanks,
Nick

[rotem871]

I've merged your posts for clarity rotem871. Please try to avoid creating separate threads discussing the same issue as it only make it harder to track and resolve the issue.

As mentioned, effects in FSX/P3D use either regular or extended bitmaps: there's no need to try and change them to anything else. The content errors for various products reported may be unrelated to the CTD.

Please can you try to clarify the sequence of events your experiencing, as it's currently a little hard to follow. Also, which aircraft is saved within the P3D default flight?

Thanks,
Nick

When I opened the Sim and pick a2a c172 aeroplane and set to dusk and pick an airport after the Sim loaded the cockpit of the c172 is black and and if I switch to look around view all the cabin is black and after 5 seconds the secnery gets black and then the Sim crash
This problem happened in dusk inviroment and night and rise sun but in day light the Sim doesn't crash but only the light don't work . And where can I find p3d default flight
Thanks for your help

[Nick - A2A]

Thanks for the added info. When you first launch Prepar3D, which aircraft first loads in the "vehicle" panel at top left? (By default it's the F-22 at Eglin AFB.)

Also, please can you let us know if the CTD occurs at dawn/dusk occurs with default aircraft in the sim (e.g. the F-22)?

Thanks,
Nick

[Lewis - A2A]

Hello,

just to add to Nicks post can you please also let us know a little about your system, its specs hardware and other third party software you are using.

thanks,
Lewis - A2A

[rotem871]

Thanks for the added info. When you first launch Prepar3D, which aircraft first loads in the "vehicle" panel at top left? (By default it's the F-22 at Eglin AFB.)

Also, please can you let us know if the CTD occurs at dawn/dusk occurs with default aircraft in the sim (e.g. the F-22)?

Thanks,
Nick

when i first open the sim the first aircraft i see is the f22 in the 3d model and when u open the select vehicle i first see the a2a c172

this is some of the errors i get
------------------------------------------
[error.0]
error=Error loading RAASPRO.dll: %1 is not a valid Win32 application.


[error.1]
error=Failed to load visual effect "fx_navred"

[error.3]
error=Failed to load visual effect "fx_strobe"

[error.9]
error=Failed to load visual effect "fx_landing"

[error.61]
error=Failed to load visual effect "fx_beaconwhi"

[error.62]
error=Failed to load visual effect "fx_beacong"

[error.86]
error=Failed to load visual effect "fx_lightObsWhiteFlash40Med"

[error.302]
error=Failed to load visual effect "fx_contrail_l

[error.64]
error=Failed to load visual effect "fx_obslight2"

[error.331]
error=Failed to load visual effect "fx_vclight

[rotem871]

Hello,

just to add to Nicks post can you please also let us know a little about your system, its specs hardware and other third party software you are using.

thanks,
Lewis - A2A

gt 1030 ddr4
16 gb ram
intel core i 5-2500

[Lewis - A2A]

Hello,

can you please give as much information as possible so we can better help you.

Please can you let us know your full system specs and setup, any third party software you have running and as Nick mentions if you are receiving errors with just the 172 or other add-on aircraft/default aircraft too so we know if its an issue with our software or with your P3D install itself.

thanks,
Lewis - A2A

[rotem871]

Hello,

can you please give as much information as possible so we can better help you.

Please can you let us know your full system specs and setup, any third party software you have running and as Nick mentions if you are receiving errors with just the 172 or other add-on aircraft/default aircraft too so we know if its an issue with our software or with your P3D install itself.

thanks,
Lewis - A2A

hi i am using on my p3d orbx base ,open lc and vector also i am using rex 4 my third party software i use is kaspersky total security and about the errors i get them every time even with a default aircraft and when i open the sim but only the a2a c172 light arent working and the default / other addon aircarft light are working