Hey A2A,
I recently bought the Flight1 GTN 750 for FSX, but I'm having an issue. I have the GTN Trainer Installed, and The GTN 750 itself installed. I also changed the GPS in the Aircraft Configurator. When I load into the plane, the 2D panel loads okay, but there's no 3D panel in the airplane. I have also hit SHIFT + 3 and tried to change it, but it remains as the default in there. I have been working at this for nearly 2 hours and have finally resulted to the forum myself.
Thank you,
Harry Linsenmayer
Flight1 GTN 750 Trouble
- rhenson529
- Senior Airman
- Posts: 169
- Joined: 23 Mar 2015, 23:46
- Location: KPAE
Re: Flight1 GTN 750 Trouble
Hello Harry,
Welcome to the forums. First, did you load the GTN through the A2A configuration or through the Flight 1 configuration? The GTN should be added in the A2A Configuration. You can find this under the start menu.
Before you install the GTN, be sure to fly your new plane first with the default radios.
Hope this helps. Enjoy!
Ron
Welcome to the forums. First, did you load the GTN through the A2A configuration or through the Flight 1 configuration? The GTN should be added in the A2A Configuration. You can find this under the start menu.
Before you install the GTN, be sure to fly your new plane first with the default radios.
Hope this helps. Enjoy!
Ron
A2A Planes: Cub, 172, 182, Cherokee, Comanche, Bonanza,T6, 377, Spitfire, and P51
Hardware: i7 (5.0 ghz) 32 GB 3000Ghz; RTX 2080ti; 1TB PCIe M.2; 1TB PCIe M.2
Hardware: i7 (5.0 ghz) 32 GB 3000Ghz; RTX 2080ti; 1TB PCIe M.2; 1TB PCIe M.2
Who is online
Users browsing this forum: No registered users and 11 guests