Page 1 of 3

CTD after loading 100%

Posted: 19 Feb 2018, 09:02
by 1W4P
Hello guys,
I encountered a very strang behavior of P3D V4.2. Upon loading the Cessna 172 the sim crashes immediately after reaching 100 %. This only happens when loading the A2A C172.
Things I've already tried:
Running P3D as admin,
installing the C172 + latest update as admin,
installing the C172 while anti virus program + Windows Firewall disabled.
Things like DirectX, Visual C++ Redistributable etc. are up to date.
However I had no success.
Moreover the Content Error Log didn't show any discrepancies, same with Win EventVwr.

I would be very greatful for a hint.

Best regards,
Steffen

PS: I don't blame you guys from A2A for anything. Just three weeks ago on the old system everything worked well. Because of some issues, not concerning any A2A-Products, I completely reeinstalled Win + P3D etc.

Re: CTD after loading 100%

Posted: 19 Feb 2018, 19:44
by Nick - A2A
Hello Steffen - welcome to the forums. :)

When you load the A2A 172, do you do so straight from the 'scenario' menu, or have you tried loading a default P3D aircraft first, then switching to the 172?

Also, are you loading with default scenery, or is any add-on scenery involved?

Finally, is it definitely the 64-bit P3Dv4 version of the 172 which you've installed?

Thanks,
Nick

Re: CTD after loading 100%

Posted: 20 Feb 2018, 10:00
by 1W4P
Hi Nick,

I've already tried loading a default acft first, then switching over to the C172. That actually resulted in a CTD as well. Nonetheless, I noticed that the C172 worked for a second or two. Like seeing your mouse cursor moving in the cockpit. But then, freeze. No error, neither in P3Dv4.2 nor in the Win10 errorlog. And I am a 100 percent sure, I've installed the P3Dv4-Version of the A2A-Cessna.
I have several ORBX sceneries installed.

Thank you,
Steffen

Re: CTD after loading 100%

Posted: 20 Feb 2018, 10:02
by Lewis - A2A
Hello,

can you check your system crash logs which will help ID the crashing file.

thanks
Lewis

Re: CTD after loading 100%

Posted: 20 Feb 2018, 10:24
by 1W4P
Hello Lewis,

unfortunately there was no error detected in Windows Event Viewer.
This is what P3D says:

[error.0]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.1]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.2]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.3]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.4]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.5]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.6]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.7]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.8]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.9]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.10]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.11]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.12]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.13]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.14]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.15]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.16]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.17]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.18]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.19]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.20]
error=file "null(.wav|.ogg)" not found

[error.21]
error=file "null(.wav|.ogg)" not found

[error.22]
error=file "null(.wav|.ogg)" not found

[error.23]
error=file "null(.wav|.ogg)" not found

[error.24]
error=file "null(.wav|.ogg)" not found

[error.25]
error=file "null(.wav|.ogg)" not found

[error.26]
error=file "null(.wav|.ogg)" not found

[error.27]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.28]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.29]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.30]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.31]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.32]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Carenado C172N SKYHAWK II

[error.33]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:Copyright © CARENADO 2009 - All Rights Reserved

[error.34]
error=Key values exist outside of a section:
File:C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Carenado C172II N\aircraft.cfg
Key:*********************************************************

[error.35]
error=Failed to load visual effect "null"

[error.36]
error=Texture fx_a2a_c182_lights_1.bmp failed to load (FE_REQUEST_STATUS==13)

I'm sorry. I wasn't able to attach the txt-file.

Re: CTD after loading 100%

Posted: 20 Feb 2018, 10:51
by Lewis - A2A
Hello,

can you let me know about your system with regards its OS and sound setup.

thanks,
Lewis

Re: CTD after loading 100%

Posted: 20 Feb 2018, 12:03
by 1W4P
Win 10 Home x64. I'm not sure what you mean by "audio setup". Device manager - sound: NVIDIA High Def. Audio; NVIDIA Virtual Audio Device (Wave Extensible) WDM; Realtek High Def. Audio.

Re: CTD after loading 100%

Posted: 20 Feb 2018, 12:08
by Nick - A2A
Hi Steffen,

Just to revisit one of my earlier questions, have you tried loading the 172 at a stock P3D airport (i.e. somewhere outside of your Orbx scenery areas) to see if the issue still occurs? I've noticed a higher likelihood of issues loading complex aircraft at complex Orbx airports.

Thanks,
Nick

Re: CTD after loading 100%

Posted: 20 Feb 2018, 12:14
by 1W4P
Hi Nick,

yes I did. No positiv outcome. Been to Florida, no addon scenery etc. Honestly, never had problems regarding performance back in the days before reeinstalling my OS.

Win 10, 64 bit
I7 7700k 4.2 GHz
16 GB RAM
NIVDIA GeForce GTX 1070
1.8 TB HDD.

Re: CTD after loading 100%

Posted: 20 Feb 2018, 12:34
by Nick - A2A
Okay, thanks Steffen. Just out of interest, is this a clean installation of P3Dv4.2 or have you updated from P3Dv4.1 or v.4.0?

Nick

Re: CTD after loading 100%

Posted: 20 Feb 2018, 12:44
by 1W4P
I appreciate your help. I completely reinstalled my OS and then made it a vanilla P3Dv4.2.

Re: CTD after loading 100%

Posted: 20 Feb 2018, 12:49
by Nick - A2A
Okay, actually I did a similar exercise myself a few days ago. :) Have you made certain that all the relevant drivers (particularly audio drivers) have been reinstalled?

Nick

Re: CTD after loading 100%

Posted: 20 Feb 2018, 13:10
by 1W4P
And I only did it to prevent this situation from happening. :roll:
Yes, just checked. All up to date. I already see myself reeinstalling again...

Re: CTD after loading 100%

Posted: 20 Feb 2018, 13:15
by Nick - A2A
Before we get to that stage, could you just list any other add-ons you have installed in P3D Steffen? Anything like FSUIPC for instance?

Also, which directory did you install the A2A 172 to?

Thanks,
Nick

Re: CTD after loading 100%

Posted: 20 Feb 2018, 13:44
by 1W4P
FSUIPC 5.123 unregistered
REX Essential +
Orbx GEN GES
LC EU, Vector, Global Texture, Trees HD
FSXWX
A2A C172
F1 GTN 650/ 750 (tried with and without)


This is it so far.

Installation path: C:\User\OneDrive\Documents\Prepar3D v4 Add-ons
This path also matches the one in the addon.cfg.

Thanks,
Steffen