Ezdok Help

[aceridgey]

Hi there guys,

I read the FAQ thread in the tech support area before I did this. It mentioned that I have to move the EZDOK entry from the bottom of the aircraft config file to the top and change the numbers.

Although the walk around check camera's are now 100% in the correct place, if I do an external walk around (from the outside view) I am missing the front wheel and it seems to be stuck in "VC2 mode, as the directional keys are a mis-aligned (pressing forward goes right, and left goes down).

Here is a snapshot of some of the ordering of the aircraft config.

[CameraDefinition.0]
Title=EZdok Aircraft Universal camera
Guid={D8D67955-2E9B-4e75-9D8B-8EFFBBFAC65B}
Description=Universal camera for EZdok cam utility
Origin=Center
SnapPbhAdjust=Swivel
SnapPbhReturn=FALSE
PanPbhAdjust=Swivel
PanPbhReturn=FALSE
Track=None
ShowAxis=FALSE
AllowZoom=TRUE
InitialZoom=0.40
ShowWeather=Yes
InitialXyz=0,0,0
InitialPbh=10, 0, 0
XyzAdjust=TRUE
Category=Aircraft
MomentumEffect=FALSE
ClipMode=Minimum
HotKeySelect=4

[CameraDefinition.1]
Title = "Pitot Tube Heat Test"
Guid = {3A09FD6C-D406-4d8f-A5CD-FA4F5E0A88ED}
Description = Preflilght inspection
Origin = Virtual Cockpit
SnapPbhAdjust = FALSE
SnapPbhReturn = FALSE
PanPbhAdjust = FALSE
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 1.0
ShowWeather = Yes
InitialXyz = -0.5, -0.05, 0.15
InitialPbh = -7, 0, 283
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum
HotKeySelect = 4

[CameraDefinition.2]
Title = "Verify Baggage Door is Locked"
Guid = {3A09FD6C-D406-4d8f-A5CD-FA4F5E0B88ED}
Description = Preflilght inspection
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 1.0
ShowWeather = Yes
InitialXyz = -1.98, 0.5, -2.05
InitialPbh = 18, 0, 62
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum

[CameraDefinition.3]
Title = "Tail"
Guid = {C690EAFD-223A-42d0-99E0-681ADF93BB59}
Description = Preflilght inspection
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 1.0
ShowWeather = Yes
InitialXyz = -1.5, 1.5, -9
InitialPbh = 8, 0, 20
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum


[...] (The rest of the cameras) [...]

And at the bottom 3 more entries.

[CameraDefinition.20]
Title = "Left Flap"
Guid = {D8D67960-2E9B-4e75-9D8B-8EFFBBFAC64C}
Description = Preflilght inspection
Origin = Center
SnapPbhAdjust = Swivel
SnapPbhReturn = FALSE
PanPbhAdjust = Swivel
PanPbhReturn = FALSE
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 1.0
ShowWeather = Yes
InitialXyz = -3, 1, -2.6
InitialPbh = 6, 0, 35
XyzAdjust = TRUE
Category=Aircraft
ClipMode=Minimum



[CameraDefinition.001]
Title = "Right Seat"
Guid = {195EAB58-9E4A-1E2A-A34C-A8D9D948F078}
Origin = Virtual Cockpit
MomentumEffect = Yes
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = YES
AllowZoom = TRUE
InitialZoom = 0.75
SmoothZoomTime = 2.0
ZoomPanScalar = 1.0
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=20
HeadingPanRate=60
InitialXyz=0.5, 0.04, -0.1
InitialPbh=0, 0, 0

[CameraDefinition.002]
Title = "Radio Stack"
Guid = {195EAB58-9E4A-2E2A-A34C-A8D9D948F078}
Origin = Virtual Cockpit
MomentumEffect = Yes
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 1.2
SmoothZoomTime = 2.0
ZoomPanScalar = 1.0
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=20
HeadingPanRate=60
InitialXyz=0, -0.2, 0
InitialPbh=9, 0, 22

[CameraDefinition.003]
Title = "Light Switches"
Guid = {195EAB58-9E4A-3E2A-A34C-A8D9D948F078}
Origin = Virtual Cockpit
MomentumEffect = Yes
SnapPbhAdjust = Swivel
SnapPbhReturn = False
PanPbhAdjust = Swivel
PanPbhReturn = False
Track = None
ShowAxis = FALSE
AllowZoom = TRUE
InitialZoom = 1.3
SmoothZoomTime = 2.0
ZoomPanScalar = 1.0
ShowWeather = Yes
XyzAdjust = TRUE
ShowLensFlare=FALSE
Category = Cockpit
PitchPanRate=20
HeadingPanRate=60
InitialXyz=0, -0.5, 0
InitialPbh=0, 0, -5



Thanks for your help in advance,

Alex

[chadryan]

What I have resorted to doing is deleting the ezdok entry from the config file altogether and just not using ezdok for external views. The walk around works perfectly and I just use the regular fsx view system for external views

Sent from my SGH-I317M using Tapatalk

[aceridgey]

Any more advice on this?

Alex

[TreeTops]

There is so much wrong advice floating around about using the ezdok system with the walk around.
Read the section in the FAQ, make the changes to the camera definitions, reload aircraft, start in the vc, shift 8 starts the walk around function, start clicking the right arrow button on the information box.
Every other advice is forcing the user to perform the walk around not as intended. Ie backwards.
Hope this clears things up.