I haven't used C172 for some time.
Now, when I open it with Windows 10, I cannot get any panels to open. If I press one of the shift key combinations, it just flashes for a second and disappears?
I cannot even get panels using the FSX open panel method?
I used the link to download and re-install sim connect and it does not fix it?
FSX w /SP2 and W10
Thank you
Norm
No Panels Visible
Re: No Panels Visible
Check your transparency settings.
Cheers Chris
Cheers Chris
Re: No Panels Visible
I can't even do that as I am not able to access ANY panels??
Thanks
Thanks
Re: No Panels Visible
Checked FSX transparency levels and tried it at both ends of spectrum with no change?
Thanks
Norm
Thanks
Norm
Re: No Panels Visible
Forgot to add
I also did an uninstall/re-install with no resolve?
I also did an uninstall/re-install with no resolve?
Re: No Panels Visible
After doing some extensive searching through the forums, I found a series of posts from Ian-D who had the same problem!
He eventually resolved it by re-installing SP2???
I did the same thing and it cured it..........Hooray and thanks a million to Ian_D !!!!
One thing I did learn is that this is, by no means, an uncommon problem as I found many instances of people with the exact same thing!
Anyway, all well that ends well and thanks again to Ian
He eventually resolved it by re-installing SP2???
I did the same thing and it cured it..........Hooray and thanks a million to Ian_D !!!!
One thing I did learn is that this is, by no means, an uncommon problem as I found many instances of people with the exact same thing!
Anyway, all well that ends well and thanks again to Ian
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: No Panels Visible
Hi Norm,
Glad you hear you tracked down the solution. Thanks for letting us know what the fix was in your case.
Nick
Glad you hear you tracked down the solution. Thanks for letting us know what the fix was in your case.
Nick
Re: No Panels Visible
Thank you.
Suggestion?
After doing my extensive, research into this particular problem and, seeing numerous people experiencing that same condition, it was obvious that the eventual solution (re-install SP2) was found by the person experiencing the anomaly and, not as a result of a suggestion by the forum principals responding?
Is there a way that this resolve could be suggested as a more initial fix attempt thus perhaps, saving a lot of time and grief?
Just a suggestion
Norm
Suggestion?
After doing my extensive, research into this particular problem and, seeing numerous people experiencing that same condition, it was obvious that the eventual solution (re-install SP2) was found by the person experiencing the anomaly and, not as a result of a suggestion by the forum principals responding?
Is there a way that this resolve could be suggested as a more initial fix attempt thus perhaps, saving a lot of time and grief?
Just a suggestion
Norm
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: No Panels Visible
Hi Norm,
We try to respond to customer's posts as quickly as possible, but with the best will in the world, it's not possible for us to man the forums 24x7. In your case, you posted at around 1am in my timezone and you'd found the answer to your problem by 7:20am.
In this case, the problem you describe has different solution depending on the user's system. However, I'm glad that you found Ian D post - that's why we have open support forums.
Thanks,
Nick
We try to respond to customer's posts as quickly as possible, but with the best will in the world, it's not possible for us to man the forums 24x7. In your case, you posted at around 1am in my timezone and you'd found the answer to your problem by 7:20am.
In this case, the problem you describe has different solution depending on the user's system. However, I'm glad that you found Ian D post - that's why we have open support forums.
Thanks,
Nick
Re: No Panels Visible
There is also the FAQ topic for the C172 in the C172 Tech Support forum.
http://a2asimulations.com/forum/viewtop ... 08&t=35640
In there is listed that Service Pack 1 and 2 is required for the software to work. This is also noted in the manual in the prelude to the installation instructions in red text.
http://a2asimulations.com/forum/viewtop ... 08&t=35640
In there is listed that Service Pack 1 and 2 is required for the software to work. This is also noted in the manual in the prelude to the installation instructions in red text.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
Re: No Panels Visible
Thank you
To be absolutely clear, I was not making any suggestions that my post took a long time for a response, on the contrary, it was responded to very quickly, thanks.
Also, as I have been a simmer a for many years with a fully equipped motion platform , I am very conversant with PC systems and various cockpit automations. I am fully aware that SP1and 2 are essentials!
Thank you both for taking the time to respond
Norm
To be absolutely clear, I was not making any suggestions that my post took a long time for a response, on the contrary, it was responded to very quickly, thanks.
Also, as I have been a simmer a for many years with a fully equipped motion platform , I am very conversant with PC systems and various cockpit automations. I am fully aware that SP1and 2 are essentials!
Thank you both for taking the time to respond
Norm
Who is online
Users browsing this forum: No registered users and 23 guests